CIC高压差分探头DP04系列
CIC DP04系列
CIC高压差分探头,有高精度和电压,高共模抑制比。
CIC Research DP系列高压差分探头采用新的技术,特别是针对高压,高共模,高速信号的测量时,我们的高压差分探头的性能较好于传统高压探头。同时,该高压差分探头提供高精度测量的同时,保证其拥有极低的偏置电压。
CIC Research DP高压差分探头采用特殊的电源供电模块,使高压探头拥有更高的稳定度以及更低的噪声。其LVC高精度系列的高压探头,内部元件采用极低的温度系数和电压系数,可以提供极高的测试精度。所有有源的高压差分探头输出阻抗50Ω,可以适用于示波器,电压表。
性能特点:
- 较低的等效输入电容
- 75MHz - 120MHz带宽 (满量程)
- 高达20KV有效值,30KV峰值电压
- 精度高达0.1%
- 较好共模抑制比和转换速度
应用领域
CIC Research DP有源高压差分探头,可以用功率/能源监测系统的测试。其较低的输入容抗,可以测试更高电压频率,CIC research DP高压差分探头有着极高的频率响应,可以测试超过150MH的高电压信号,广泛的应用于兆万级案引送变器,电源设计,功率发生器,UPS等
高压差分探头拥有较高的转化速度,特别适合于燃料动力汽车,电动汽车,混合动力汽车的研究和测试,以及电磁系统,高能研究所核物理研究以及特殊崎岖的高压宽带信号的测试。
INPUT |
DP04-100 |
DP04-100-LVC |
DP04-1K |
DP04-1K-LVC |
DP04-2K |
DP04-2K-LVC |
DP04-10K |
DP04-10K-LVC |
Input Voltage CM RMS Max |
1.0 kV |
4.0 kV |
3.15 kV |
4.0 kV |
3.15 kV |
4.0 kV |
3.15 kV |
|
Input Voltage CM Peak Max |
175 V |
1.75 kV |
3.5 kV |
6.0 kV |
||||
Input Voltage CM Peak Ma x |
6.0 kV |
|||||||
Input Voltage DM RMS Max 4 |
2.0 kV |
8.0 kV |
6.3 kV |
8.0 kV |
6.3 kV |
8.0 kV |
6.3 kV |
|
Input Voltage DM Peak |
175 V (Measurable) |
1.75 kV (Measurable) |
3.5 kV (Measurable) |
12 kV (Measurable) |
||||
Input Voltage DM Peak Max 4 |
12.0 kV |
|||||||
Bandwidth |
120 MHz |
|||||||
Division Ratio |
1:100 |
1:1,000 |
1:2,000 |
1:10,000 |
||||
Input impedance |
1 MΩ || 2.2 pF each input to GND |
10 MΩ || 2.2 pF each input to GND |
||||||
OUTPUT |
||||||||
Output Voltage DC, RMS |
±1.75 V |
|||||||
Output Voltage Peak |
±2.00 V |
|||||||
Output Impedance |
50 Ω (50 Ω termination is required) |
|||||||
Rise Time |
<2.9 ns |
|||||||
Offset |
±580 μV digitally adjustable (~36 μV/step) using the up (+) and down (-) momentary offset switches |
|||||||
Accuracy |
1.0% |
0.1% |
1.0% |
0.1% |
1.0% |
0.1% |
1.0% |
0.1% |
Noise |
10 μVrms |
|||||||
Common Mode Rejection |
|
|||||||
100Hz |
-120 dB |
-130 dB |
-145 dB |
-155 dB |
-145 dB |
-155 dB |
-145 dB |
-155 dB |
100KHz |
-100 dB |
-110 dB |
-115 dB |
-125 dB |
-115 dB |
-125 dB |
-115 dB |
-125 dB |
10MHz |
-90 dB |
-100 dB |
-100 dB |
-110 dB |
-100 dB |
-110 dB |
-100 dB |
-110 dB |
MECHANICAL |
||||||||
Case Cover |
Aluminum |
|||||||
Dimensions (L x W x D) |
5.125” X 3.125” X 1.675” (130 mm X 79 mm X 43 mm) |
|||||||
Unit Weight |
1.27 lb (575g) |
|||||||
Cooling System |
Convection |
|||||||
Input Connector |
4 mm safety plugs |
|||||||
Output Connector |
50Ω BNC |
|||||||
Power |
±5.20 V @ 100 mA |
|||||||
ENVIRONMENT |
|
|||||||
Operating Temperature |
-40° C to +85° C |
|||||||
Storage Temperature |
-55° C to +100° C |
INPUT |
DP20-10K |
DP20-10K-LVC |
DP20-20K |
DP20-20K-LVC |
Input Voltage CM RMS Max |
10 kV |
|||
Input Voltage CM Peak Max |
15 kV |
|||
Input Voltage CM Peak Ma x 4 |
15 kV |
|||
Input Voltage DM RMS Max |
20 kV |
20 kV |
||
Input Voltage DM Peak |
17.5 kV (Measurable) |
30 kV (Measurable) |
||
Input Voltage DM Peak Max 4 |
30 kV |
30 kV |
||
Bandwidth |
120 MHz |
|||
Division Ratio |
1:10,000 |
1:20,000 |
||
Input impedance |
20 MΩ || 2 pF each input to GND |
50 MΩ || 2 pF each input to GND |
20 MΩ || 2 pF each input to GND |
50 MΩ || 2 pF each input to GND |
OUTPUT |
||||
Output Voltage DC, RMS |
±1.75 V |
|||
Output Voltage Peak |
±2.00 V |
|||
Output Impedance |
50 Ω (50 Ω termination is required) |
|||
Rise Time |
<2.9 ns |
|||
Offset |
±580 μV digitally adjustable (~36 μV/step) using the up (+) and down (-) momentary offset switches |
|||
Accuracy |
1.0% |
0.1% |
1.0% |
0.1% |
Noise |
10 μVrms |
|||
Common Mode Rejection |
||||
100Hz |
-120 dB |
-130 dB |
-145 dB |
-155 dB |
100KHz |
-100 dB |
-110 dB |
-115 dB |
-125 dB |
10MHz |
-90 dB |
-100 dB |
-100 dB |
-110 dB |
MECHANICAL |
|
|
|
|
Case Cover |
Aluminum |
|||
Dimensions (L x W x D) |
6.625” X 7.220” X 3.625” (168 mm X 183 mm X 92 mm) |
|||
Unit Weight |
5.5 lb (2.5 kg) |
|||
Cooling System |
Convection |
|||
Input Connector |
4 mm safety plugs |
|||
Output Connector |
50Ω BNC |
|||
Power |
±5.20 V @ 100 mA |
|||
ENVIRONMENT |
||||
Operating Temperature |
-40° C to +85° C |
|||
Storage Temperature |
-55° C to +100° C |